Back to previous page

FIREPROOF SILICONE



 

   



 

 



Product Description   

Fireproof Silicone is an flame-resistant, single-component, neutrally interlocking sealant on a polysiloxane base. It is suitable for internal an external use. The material does not contain any solvent or halogens, which means that no toxic of corrosive gases are formed in the case of fire. The silicone is weather-resistant and elastic. It also adheres well to a large range of materials including glass.





Test Certificate

P-HFM 00 4 147 / MPA


Characteristics

Components  1
Gross density  1,3 g/cm²
Shore A  approx. 27
Viscosity  paste-like, stable
Formation of skin (start)  approx. 20 min. at 23°C and 50% humidity
Tensile strenght  approx. 1,8 N/mm³
Elongation at break  approx. 550%
Hardening per day  approx. 2 mm

Admissible total deformation

 25%
Temperature-resistance  from -40°C to +180°C
Weather-resistance  no influence from weather or temperature, ozone or UV radiation
Storage capabilty  12 months at room temperature


Possible Applications

Fireproof Silicone is especially suitable for the following applications:
  • Sealing joints between enclosing walls

  • Sealing connections between wall and ceiling and/or floor

  • Sealing window connection joints

  • As a sealant for fire-protection glazing

  • Sealing pipe ducts, cable ducts, ventilation channels etc.

 

Adhesion

  • Glass / good adhesion without primer to glass, ceramic tiles and enamelled bases

  • Porous bases / Kerafix Primer MSP Transparent should be applied to porous bases such as concrete, aerated concrete, plaster, stone and fibrous cement

  • Metal / Kerafix Primer M is recommended on uncoated metals, such as anodised aluminium, stainless steel, galvanised steel, copper, lead and zinc

 

Processing

The bases must be clean, dry and free from dust and grease.

  • Smoothing

Due to the formation of skin within 15 minutes, press the sealant against the walls of the joint with a jointer or a spaluta and smooth immediately. A mild soap solution prevents adhesion of the sealant to tools. However, avoid getting soap solution between the sealant and the edge of the joint, as this can result in loss of adhesion.

  • Hardening

The material hardens out under the influence of the moisture in the air.

 

Available sizes

Fireproof Silicone is available in 310 ml canisters in the colours:  white - black - grey - brown - transparent.

 

Installatieweg 8 - 1271 EM Huizen - The Netherlands
Tel. + 31(0)35 6409958 -
Fax + 31(0)35 6409959
info@dornex.eu - www.dornex.nl - VAT NL8161.82.127.B01- KVK 32116330